-
Hi
My special application needs 4 small nema 17 motors driving 1 central axle
Driver is tmc 5160 3Amps, 24 V
movement is troublesome
I am a bit stumped, 70 watts should be more yhan enough
S…
-
I have a bunch of BTT TMC5160 Pro v1.1
I used them on MKS Monster 8 v1.0 without issues.
But on BTT Octopus Pro v1.1 STM32H723
I got "Unable to write tmc spi 'stepper_z' register" issues while …
-
Using the BTT TMC5161 v1.1 sticks on a BTT SKR v1.4 and SKR Pro v1.1.
In both situation the TMC5161 driver recognizes a stall and shuts down...
With the same settings a TMC5160 stick works just …
-
Looking to convert this to a TMC2208. I was wondering if any firmware modifications would be necessary? Any help appreciated!
-
Hi @bdring,
would it be possible to buy one of the testing boards? I've some experience with TMCs from my Powder'o'matic project (https://github.com/haklein/Powder-O-Matic). I'd like to help with t…
-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
Stepper motors are noisy/vibrate at low, medium and high speeds (30mm/s, 60mm/s, 80mm/s, 120mm…
-
Hi,
I want to control 5 TMC5160 BOBs over SPI using a Teensy 4.0. I've managed to get the library (Release_v1) working with one 5160 using the code below (a modified version of some example code I …
-
What you have done is impressive with the integrated closed loop circut - but the A4950 is older and antiquated. What about the TMC4671 - ? Or other even two options with the TMC5160 & TMC2209?
-
#### Description
Describe the issue or feature request in detail. Take a screenshot or record a video will be helpful.
#### Versions
- CNCjs: 1.9.x
- Node.js: 6.x
- NPM: 5.x
#### How Do …
-
I'm an electrical engineer (not software super person) using a TMC5160 with an encoder. I found that no matter how I set ENC_CONST using this library's function, it would only ever set the lower 16 bi…