-
Would like the ability to load multiple MakeCode Aracade games onto hardware (Adafruit pygamer) https://www.adafruit.com/product/4242
My two cents on this 😊
The Microsoft MakeCode Arcade team co…
-
I am using an M1 Mac. If I boot the board in the RP2040 mode (as described at https://github.com/lowRISC/sonata-system/releases/tag/v0.1), the mount appears reliably every time. However, in the other …
-
I realize that this would mean a ROM change, and I'm not sure how important it is, but...
As I understand it, if you load a UF2 file that contains only RAM content, the bootloader will assume that …
-
The examples should use elf2uf2 to build uf2 files that can be flashed with the USB bootloader, for people that don't have a SWD debugger connected. I think we can make gprbuild call elf2uf2 after bui…
-
Hello,
Sorry for posting wrong place due to can't find your contact info and issues page.
I would like to use your forked qmk_firmware(qmk-zq), because I recently bought epomaker 680 (a.k.a fk680 pr…
-
## What happened
I observed that the DFU OTA always fails with latest code on my M60 keyboard(nrf52840). When using a bootloader compiled from current master branch (https://github.com/adafruit/Ada…
-
I am playing with a blackpill stm32f401 to and zmk...
https://github.com/alinelena/zmk-config/
I have noticed that &reset just block the board
&bootloader just resets the board.
happy to provi…
-
HI, @wagiminator
How can i change the bootloader led pin from 6 to 28
on pin PA02 i need to enable Interrupt also
please support
-
Devices like the itsybitsy-m4 are not having the symlink for their MSD mode removed when the device is disconnected. This causes the device to not be able to be flashed until the symlink is manually d…
-
Hello, I'm working on a project using this board, is it possible to have the source code of the bootloader? Is it a Bossa bootloader, right? I would like to implement a DFU mode like the Nordic bootlo…