-
Hi,
I am currently playing around withe USBMIDI capabilities and I am having a small issue. I would like to use the native USB of the ESP32S2 to act as both a midi device and being able to program.…
-
**Describe the bug**
When sending usb packets continuously apparently some are dropped.
There are no logs from the usb subsystem that bytes were dropped.
I was testing on a nrf52840dk with the cdc_…
-
esptool.js v0.1-dev
Serial port WebSerial VendorID 0x303a ProductID 0x2
Connecting.........._
Detecting chip type... ESP32-S2
Chip is ESP32-S2
Features: Wi-Fi
Crystal is 40MHz
MAC: 68:67:25:2d:…
-
thanks for the tool, I found an issue when trying to run it.
Only the Service ID and the CID and the dump of the Information buffer was shown in Mobile Broadband Interface Model section of the decodi…
vheat updated
2 weeks ago
-
The system freezes after entering 'sysexec psh' as soon after system startup. This issue arises with following the change [armv7m/pmap: Add missing spinlock](https://github.com/phoenix-rtos/phoenix-rt…
-
Hello!
This is less of an "issue" and more of an "I've never written any USB protocol code before and therefore don't really know where to start/look for help."
My task: to set up a USB CDC pro…
-
FIrst of all, I'm extremely new to MCU programming so sorry if I'm asking something stupid.
Is it possible to get the debug output over USB? Via serial, uart, I don't know. I have a CH582M in one o…
-
Currently, there is no support for USB in the built sketch. It would be extremely useful to be able to select that and get the appropriate
software included, and get a /dev/ttyACM0 device for Serial.
-
Hi there,
Trying to write a project using both hardware Serial1 and USB Serial but the CDC port gets disabled when using Platform IO to program my Arduino Pro Micro and requires using the reset but…
-
### CircuitPython version
```python
8.0.4 on Pico/Tiny2040
```
### Code/REPL
```python
import usb_cdc
usb = usb_cdc.data
if usb.in_waiting:
print(usb.readline())
```
### Behavior
No da…