-
- Serial port definition in **mariner** is currently hard-coded at `mariner/mars.py`
- This is to be expected since **mariner** targets the Raspberry Pi Zero W as the microPC board to use
- This als…
-
I've noticed that none of my usb-uart adapters but the MAX232 are working. The DC voltage between power and gnd is 5.04V, between signal-gnd 4.2V. Watching it on the scope I notice that the voltage di…
-
Hi, I have several RS232 devices connected to my computer using HL-340 USB-to-RS232 converters. However, Cura is extremely slow when loading models(STL files) if these converters are plugged in when C…
-
I read through the readme and a previous issue regarding the type of cable to be used between the PC running FreeSSM and the vehicle. Will one of the commonly available USB to OBDII type adapters work…
-
**Describe the bug**
I am trying to control a custom Arduino device via Serial. COM ports are enumerated successfully, but App throws timeout messages every time it trys to send a message out (see b…
-
I’m looking at potential new CORE-POS lane installations, and I’m perusing the [supported hardware list](https://github.com/CORE-POS/IS4C/wiki/Supported-Hardware). Is anyone currently using a scanner/…
-
Hi,
I use VSPD to create a pair of virtual serial port, they can be seen from the device manager on windows,
![image](https://user-images.githubusercontent.com/54489994/126927671-9290ff9b-9c0a-4cd9-…
-
My board only support TTL communication, I CAN use usb to ttl connect to my mac, so Can I use ORSSerialPort send TTL serial communication?
thank u very much
Looking forward to your reply
-
Has anyone confirmed if this Zigbee coordinator firmware updater image from @walthowd is compatible with ITead’s new “Sonoff Zigbee 3.0 USB Dongle Plus V2” model “ZBDongle-E” based on Silicon Labs EFR…
-
It might be fun to port https://github.com/mvp/uhubctl/blob/master/uhubctl.c to Go, or a simpler version of it, if reducing support to only Raspberry Pis makes anything simpler.
This would allow to…