-
Hello,
I'm trying to flash the CM4 on the official IO board.
The jumper has been set to 'Fit jumper to disable eMMC Boot' and I am using the latest usbboot.
If i try to run `sudo ./rpiboot` i…
-
```
07:42 < qdk0901> sunxi-fel can speed up simply by just re-enumerate as high speed usb device
07:44 < qdk0901> sunxi-fel writel 0x01c19040 0x29860
07:46 < qdk0901> writel((readl(MUSB_POWER) & ~M…
plaes updated
2 years ago
-
- **Etcher version:** 1.5.24
- **Operating system and architecture:** Mac OSX Mojave 10.14.4
- **Image flashed:** Raspian 9
- **Do you see any meaningful error information in the DevTools?** No
…
-
- **Etcher version:** 1.4.9
- **Operating system and architecture:** Linux x86_64
- **Image flashed:** see below
- **Do you see any meaningful error information in the DevTools?**
```
/opt/balen…
lurch updated
5 years ago
-
I see that etcher-sdk 6.2.1 now includes BeagleBone boot support (https://github.com/balena-io-modules/etcher-sdk/commit/2a1d745bf59ca93739f489d7ae85ba19bc2697da). It seems the current release of Etch…
-
v1.1.0
Configuration:
```
CUSTOMER_KEY_FILE_PEM=/deploy/private.pem
CUSTOMER_KEY_PKCS11_NAME=
GOLD_MASTER_OS_FILE=/deploy/2024-07-04-raspios-bookworm-arm64-lite.img
RPI_DEVICE_STORAGE_TYPE=emmc
…
-
Has anyone successfully installed BerryBoot using the USB option (arguably BerryBoot's best feature)?
I used the config.txt edit to get a boot, and everything seemed well enough except for reported …
-
Hi,
I am getting this when trying to close to a NVME SSD:
pi@raspberrypi:~ $ sudo sys-clone nvme0n1 -f2
Target disk nvme0n1 ends with a digit so may be a partition.
sys-clone requires di…
-
3798mv100 sdk
百度盘 s/1o7QsVJ8#list/path=%2F
参考 s905，应该可以很快搞一个可用的 LibreELEC 或者 Lakka(本质一个东西）
插个蓝牙发挥余热应该很不错？
-
### Describe the bug
Following the README here: https://github.com/raspberrypi/usbboot/tree/master/secure-boot-example at the very bottom it says:
Copy the boot.img and boot.sig files from the sec…