-
Hey,
I use 120 WS2812 wit a 4A 5V power supply (limit 3800mAh). The firmware is 0.8.5 on two different ESP8266 boards. I want to use a self soldered ESP12E board with minimal space requirements. Wit…
-
First off, thank you @kueblc for picking up the torch on this, and thanks to everyone who contributed in the past, for that is the only way for any of us to Have Nice Things(tm). :smile:
I have be…
-
As soon as the Hotend fan is running I get permanent "Some problem encountered, Z-Leveling enforced". This happens when 3 or 5 calibration attempts are selected in the calibration menu. I am quite sur…
-
Hi Everybody,
I'm new in this application.
I'm tryng to setup a communication between an Arduino Uno and an Arduino Nano (with Atmel 328) using two DWM1000.
I followed the electrical scheme showed in…
-
Hi, thanks for sharing all that work. This project looks really cool.
I was wondering before I order all the parts:
Is it the final version of the pcb?
What pololu 5v booster are you using?
Wh…
-
As the RX series does not have the crystal for the RTC, nor does any model have a battery backup for time it would be advantageous to see if integrating a battery backup and crystal would be feasible.…
-
Hello Adriano,
this is not an issue related to this repo, but I've read [this old comment of yours on Arduino forum](https://forum.arduino.cc/t/connect-arduino-to-analog-telephone-like-a-fxs/326874/1…
-
Hi there,
I've been searching far and wide but haven't come around a solution to burn W27C512 EEPROMs under linux. Your ch341eeprom probably comes the closest, just lacking support for these 28-pin E…
-
Hi,
currently, the [Pololu 23201a Serial Adapter](https://www.pololu.com/product/126) would cost me about 15€, which would make this project more expensive than the old Spacemouse itself.
Is it …
-
I'm trying to recreate the base overlay for Kria-Pynq.
I've got Vivado 2020.2.2 (Windows), which is the only version that should work (as I read [here](https://github.com/Xilinx/Kria-PYNQ/issues/19…