-
After the upgrade all my Spektrum receivers report RSSI signal low or loss. Also reports batter voltage low. RSSI signal reads 31db and no battery voltages anywhere are low. FrSky recovers work fine, …
-
### Description
Hello. I trying to read value from ADC, but have something problem.
1) Added this code, without it don't get anything. It always returns the same value, regardless of the applied vol…
-
Hello,
I got an issue to get battery runtime, I have an error with "unsupported value type" :
```
ts=2024-11-01T14:05:46.715Z caller=nut_collector.go:176 level=debug variable_name=battery.runti…
-
*Sent by (dccextended@gmail.com). Created by [fire](https://fire.fundersclub.com/).*
---
## Joseph created a ticket
Name: Joseph Kelly
Email: jkelly25@optonline.net
Timezone: -5
Software: EX-Co…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Used Hardware?
Wemos D1 Mini
### What happened?
I need to read data from QPIRI.
If I set command "QPIGS" - …
-
APC UPS serial port can provide "line fail signal". Use it to define whether the grid is up or not
-
Due to the weight of current power delivery solutions a smaller more lightweight power source is needed. The target is to use one single lightweight Lithium Polymer cell that provides a nominal voltag…
-
Please add the simplest example possible to get started with this framework,
it's scary enough if a newcomer opens the current simplest example Ex_ARMAX.py
something like an RC filter which everyo…
-
So I currently use the multiple BMS configuration. I have two batteries that I use your integration with, and I really find it useful. However, I discovered that lately, the bms0 is fond of going offl…
-
Hello,
i have 2 Sonoff S60TPF power plugs and an automation, which is sending a notification when Voltage drops to 0V for a specified time. Few times a day, both S60TPF are dropping to 0V due to an u…