-
I have a easun 24v 2,4kw inverter , i change this value
// PCM and PIP inverters use below
QpiMessage _qpiMessage = {97};
QpigsMessage _qpigsMessage = {110};
QmodMessage _qmodMessage = {5};
Qpiw…
-
Hello, firstly thank you for the code, it's just what i've been looking for given that WatchPower is so bad!
I've managed to get the information from my inverter and can use `mpp-solar -s` to get the…
-
pv_input_current appear to be an integer, needs to be a float. Watchpower shows 40W of power at 70v = 0.57a.
mpp-solar shows 0 for pv_input_current if it less than 1amp
version: 0.7.3 on pi4
Linux…
-
Hello,
After change output to mpp-solar, i get 36 command out from mpp controller, but missing all info's about
- PV1 and 2 charging Power (watt),
- PV1 and 2 input current,
- Total generation …
-
The LV5048 protocol document indicates this parameter exists:
![image](https://user-images.githubusercontent.com/61173016/86513830-5765d380-bddb-11ea-891f-f91f99b1aa78.png)
![image](https://user-i…
-
The PC software works ok, whats involved in getting it working with your software?
-
Several inverters seem to return a different response depending on the firmware version they are running.
- It appears that they all start with the same data as per the protocol manual (battery/pv …
-
Hi
Great video and thanks very much for providing the code too.
I am trying to do something very similar - I have an MPP Solar PIP 5048 MK attached to my solar panels and home-made battery (10kW…
-
this is what happens when I try q1 query on PIP-4024MSP:
Note this line `DEBUG:MPP-Solar:usb byte_response was: b'(1 0 0000 15472 00001 00 00 03 000 026 019 028 00 00 000 0040 0000 0000 00.00 11\x0…
-
[LV5048 5KW protocol-20190222 for customer.pdf](https://github.com/jblance/mpp-solar/files/4386569/LV5048.5KW.protocol-20190222.for.customer.pdf)
Hello,
Thank you for your help last week. I was in…