-
### The problem
after updating to 2024.7 various counters stopped increasing, like watermeters and rain meters
### What version of Home Assistant Core has the issue?
2024.7.0
### What was the last…
-
### The problem
My water meter that uses the `pulse_meter` platform has stopped working after updating to 2023.2.0. No pulses are ever reported in home assistant or in the logs of the device.
…
-
### The Problem
Hi,
dieses Problem habe ich nach dem update auf 15.3.0: Die Ziffern werden korrekt gelesen (4037,3) aber der eigentliche Wert, der daraus erstellt wird passt nicht ganz (4037,2)
Vor…
-
### The Problem
Raw Value is 1 m³ too small. Despite the Recognized Values are correct, the Raw Value is calculated "one less" (see attached picture)
### Version
v15.5.0
### Logfile
```shell
[0d0…
-
Thank you for this good piece of work!
I've just bought a Plugwise Smile P1 device and they will install a new Smart meter (including a P1 port) in April in my house.
When I look trough the de…
-
I noticed that the pulsecounter can only update itself by using the interval setting.
It would be nice if we can add functionality that when interval is set to 0 it will only update(start PLUGIN_READ…
-
**Describe the bug**
When selecting a FLUDD nozzle for the first time, a momentary lag spike occurs.
**To Reproduce**
Open the game fresh, and either collect a FLUDD nozzle or use a command to un…
-
### Issue
Hello.
I have set up my meters finally after many hours of fine tuning the cameras 😄 and now I am at stage of adding my watermeters to HA.
So I have set the mqtt parameters everythin…
-
### The problem
Home Assistant now supports Volume flow rate (litres per minutre), rather than volume (litres)
I have a water flow meter that has been erroring for the last 12 months due to an unsup…
-
Hi :) om using this code https://github.com/chester4444/esp-multical21 for getting values from my water meter . Would the cc1101 code you have made to be able to do the same as in the repo above ?