-
Great work on this stuff, really appreciate the work it is awesome.
In the latest version of the Wemos D1 mini they have removed the series resistor from the transmit line on the serial to USB IC. …
-
Hi. Thanks for sharing. You wouldn't happen to know which pins to use with an Wemos D1 mini (esp8266)?
https://micropython-on-wemos-d1-mini.readthedocs.io/en/latest/setup.html#development-board
…
-
### The problem
Begin January 2023 I uploaded 5 new WEMOS S2 mini boards (Lolin v1) using ESPHome over USB via the "manual" mode. That alml worked fine, as long as I put the board in boot mode (press…
-
Hi,
i try to make it work with esp8266 wemos d1 mini.
I can go to the portal 192.168.4.1, select the ssid, enter the password, and click save.
But on reboot esp8266 don't connect to network and…
-
I know it's marked as experimental. But I though I could give it a try, since I still have some issues with my other esp32 wroom 4mb.
So I'm trying to build for the Wemos Lolin S3 PRO here.
But bu…
-
Hi, mcer12
Trying to get the code working at an WEMOS D1 MINI without success unfortunately.
The WEMOS is constantly rebooting with an 1-second interval.
here is a brief serial monitor output:
…
-
Hi!
**I'm new here**, trying to set your **great** Stino under Sublime Text v3.0, Build 3143, and I want to report an error when selecting **sketchbook -> espressif esp32 board**. The error is:
"Err…
-
Hi everyone I call Hasci and thanks for the great program is great. I use a Nodemcu 1.0 and I only have a problem: up to the fourth alexa device recognizes it as soon as I insert the 5th and 6th and 7…
-
Hi,
I tried you app as repeater with a Wemos mini D1.
Flshing works fine, but after flash is finished and reset of the chip no SSID "MyApp" is found.
Is this a known issue?
-
Hi,
I wanna connect my wemos d1 Mini to my Evse wb.
I have to connect tx (gpio5) and rx(gpio4)
Is gnd also needed ?
What’s are the differences between version 1.x.x and version 2.x?
Thanks for yo…