-
Hello, I use the shield with wemos d1 r1.
Shield uses pins D2, D3, D4 and D5, which is mapped to gpio 16, 5, 4, 14 according to ![wemos d1 r1 schema](https://aws1.discourse-cdn.com/arduino/origina…
-
hi, I have 16 independent LED strips and they all work. With a button on the main power I turn off everything when not in use. When I turn on some strips have the first led lit up at maximum brightnes…
-
This is a great bit of software I have tried a few Modbus examples on the Arduino but this appears to be the best. I have started using the ESP8266 modules with built in Wifi and wondered if someone w…
-
While connecting the motor shield to a raspberry pi the shield is not listed via i2c-detect.
I have tried to boards one sourced from aliexpress and one from a local reseller.
Device is connected…
-
I have an [Intergas Kompakt HR 22](https://www.intergas-verwarming.nl/zakelijk/producten/kombi-kompakt-hr/hr-22/) and normally it's connected to a Honeywell T87M OpenTherm thermostat.
I've put [thi…
-
Hey Breazile,
first of all; thanks for your work, from what i've seen it looks awesome!
I have a question for making my own mandoputer.
I'm trying to run it on a "Wemos Lolin s3 pro" with a break…
-
### Version/revision of the library used
v2.8.4
### Describe the bug
When sending a command to the airco via the MQTT server example using the detailed "Aircon" tab, the airco never goes in the d…
-
**Is your feature request related to a problem? Please describe.**
i have a led strip that contains cold and warm leds, but it only has two wires.
![image](https://github.com/user-attachments/assets…
-
Hi!
I bought this:
https://www.aliexpress.com/item/Lolin-ESP32-wemos-ESP32-WiFi-Modules-Bluetooth-Dual-ESP-32-ESP-32S-ESP8266/32807483723.html
Is this github repo right one to be used with produc…
-
I have a SCT-013-030 and my readings are off when using the ICAL proposed on http://lechacal.com/wiki/index.php/Current_Transformer_Conditioner. I need to push the ICAL up to 140 to get something reas…