-
```
I've been trying to get snake to work on one of these.
Note: I only have a Conrad device but the firmware is the same.
Hardware:
SOC: CNS2132
RAM: 32MB
FLASH: ST M25P64 (8mb)
USB-SATA bridge: S…
-
```
I've been trying to get snake to work on one of these.
Note: I only have a Conrad device but the firmware is the same.
Hardware:
SOC: CNS2132
RAM: 32MB
FLASH: ST M25P64 (8mb)
USB-SATA bridge: S…
-
```
I've been trying to get snake to work on one of these.
Note: I only have a Conrad device but the firmware is the same.
Hardware:
SOC: CNS2132
RAM: 32MB
FLASH: ST M25P64 (8mb)
USB-SATA bridge: S…
-
```
I've been trying to get snake to work on one of these.
Note: I only have a Conrad device but the firmware is the same.
Hardware:
SOC: CNS2132
RAM: 32MB
FLASH: ST M25P64 (8mb)
USB-SATA bridge: S…
-
There are various crash reports symptomatic for this.
The reason why character graphics are being unloaded are currently unknown.
The points of time for the crash are typically:
in graphics.lua…
-
When I look at the focusing from a Cartesian map wiggler, there is a kink when switching from hyper-xy to hyper-x as kx increases above kz.
I attached the file I was using to get this plot. I was u…
jeu8 updated
7 months ago
-
I have a lattice that has a large z coordinate at the beginning of the lattice due to tracking through a cartesian map wiggler. I put in a patch element to correct the timing with the rf. Running in …
jeu8 updated
5 months ago
-
Hello,
I am trying to check the laser-electron beam interaction during passing wiggler section for ESASE scheme of X-FEL [Phys. Rev. ST Accel. Beams 8, 040701 (2005)].
Could FBPIC properly simulat…
-
The plotting and data readouts for the end of this lattice do not match up, it seems to be some issue originating in the cartesian map wiggler
[cartesian_map_grad.txt](https://github.com/bmad…
jeu8 updated
7 months ago
-
Having the latest (Alpha) release, and trying with a couple projects with different resolutions and track complexities - able to reproduce error such as indicated below. Unable to output using HAP Enc…