-
With the 41rc1 update, the Winsen MHZ14A - CO2 sensor always gives 0ppm as a result. is it possible to check the code if there is a bug on the new beta release?
-
This is to create a staging branch for upgrading guideline 36 sequences.
-
I'm trying to read O3 concentration from Winsen [ZE25-O3](https://www.winsen-sensor.com/sensors/o3-gas-sensor/ze25-o3.html) ([datasheet](https://www.winsen-sensor.com/d/files/ZE25-O3.pdf)). The sensor…
-
https://gruene-winsen.de/?sunflower_event=klimafreundlich-und-zukunftsfaehig-bauen-was-ist-drin-2&format=ics
soll ich abfragen ob start und enddatum gesetzt wurde?...
-
Hi, I have some doubt about MQ131 example and parameters.
First of all, if 'b' is the result of ' log(y) - m * log(x)' , what's 'a' ?
You link a datasheet for MQ131 that consider only an high concen…
-
The sensor reading is currently only online on the http://aqi.eco portal. It would be interesting to present the data directly in the LCD display.
-
```
byte mhzCmdCalibrateZero[9] = {0xFF,0x01,0x87,0x00,0x00,0x00,0x00,0x00,0x78};
byte mhzCmdABCEnable[9] = {0xFF,0x01,0x79,0xA0,0x00,0x00,0x00,0x00,0xE6};
byte mhzCmdABCDisable[9] = {0xFF,0x01,0x7…
-
Hi...
Tried well with Thunderbird (for testing) and following `config.go` settings:
- remoteHost
- remoteUser
- remotePass
- remoteAuth
- remoteSender
Created file `userlist` (Example, pas…
-
in README.md file and in the section about CALIBRATION you have several links to the datasheet available on the sensor manufacture website. This datasheet you currently link to is version 1.0 publishe…
-
I'm participating in an Air Quality project, we are using many low cost sensors and among them there are: MQ131, MQ136, MQ2 and others. This library is really good for MQ131. I'm developing a library …