-
b'v\x95\\\x8cWR/8\x96\xa9\xd41\xabk\x11\tx\x1dA\xb68\xad\x1aWT\x15\x19\x86Z"6~ez\xe6X\xf1x\x92\x84\x0f!\xd0\xebv\x97U\xa4\xcb\x8e\x05\x12\xfc\x89\xaa\xf2\xc0\xb5\xd7\\"\x15\x9f\xa5[N\x8f)\x03\x03\x14\…
-
#######################################################
# Missing Required Files #
#######################################################
That folder is missing…
-
### The problem
I have a [shelly plug-s](https://www.shelly.com/de/products/shop/shelly-plus-plug-s-1), which I can not integrate into my home assistant:
1. The shelly integration does recogniz…
-
-
```
What steps will reproduce the problem?
Load the following feed that reproduces the problem:
http://x96.org/feed
Attempt at viewing the only it exposes. Immediately, newsbeuter, for no
good reaso…
-
Hi, I have JKBMS JK_PB1A16S15P
Hardware version V15A
Software V15.27
I cannot read any data from it.
```
$ mpp-solar -p C8:47:80:11:C6:19 -P JK04 -D
2024-07-17 20:05:09,605:INFO:__init__:ma…
-
Unsupported opcode: (bytecode=A6h) at position 36.
I am trying to decompile a python 3.12 .pyc file. But it fails for nearly all files at bytecode "A6h".
How can I possibly fix that? I wrote pyth…
-
All old versions of every data point remain in bigtable. To see this, try:
```bash
cbt --project mlab-oti --instance mlab-data-viz-prod read client_asn_by_day_hour count=1
```
and the output will…
-
Hi.
I found that packet that has '\n' followed by the char(the char that should XOR by 0xFF only ex. "clist_end\n") the new line should XOR by 0xFF as well, but in this repo, the new line is consider…
-
Version v3.0.9
Gcode saved to sd card and used in a genuine Prusa Mk3 printer.
When I use vectorise and centerline to produce gcode for the same image they both look ok in preview but the saved gc…