-
借此地方一用,我知道这里都是软件RN的交流地方,但是我实在找不到硬件的帮助,咨询你们官方工单,也没人理我,我只能来这里求助了,这里是唯一能找到小米开发者的地方了。
*******************************************************************************************
问题:
跪求wifi模组用的mcu bootl…
-
Hi, how can I create a Coremark Test for TCM. I tried to adapt the Makefiles from the hello and dhrystone examples, but without any success.
Thank you!
BR Bernhard
-
Known that sio port b does not have modem signals to the outside world.
A solution is to permanently swap ports a and b (via RomWBW config), such that
the console is on port b and the network is…
-
Probably more of a feature request, but I don't have access to write into that area. I'm pretty sure the C-Net 128 software has Ymodem, and I wonder if it can be ported over for our purposes. Since …
-
Hi,
The python script, doesn't seem to detect the device.
└──╼ $./ncp.py scan
Connecting to.. /dev/ttyUSB1 57600 True False
Exception: /dev/ttyUSB1
Connecting to.. /dev/ttyUSB0 57600 True …
-
The recovery tool benefits from a lot of open source software. Can the source code of this recovery tool itself be published? And for `update/usbprog-mars-230510.out` ?
-
you need to insert `__ym_putchar(YM_CRC);` between lines 263 and 264 in fymodem.c
currently
`/* receive packets */`
`int32_t res = ym_rx_packet(rx_packet_data,`
should be
`/* recei…
-
Suggest add newer + older firmware for the new EFR32MG21 based Zigbee 3.0 USB Dongle Model 9888010100045 from ITead
https://www.itead.cc/zigbee-3-0-usb-dongle.html
https://github.com/xsp1989/zig…
Hedda updated
3 years ago
-
I have not been able to get this to work on a Mac where I run HA and have the HubZ installed. The issue is finding the correct /dev/XXXX path I think but not sure?
-
After connecting the board via serial and uploading `hello` over xmodem, attempting to run the program gives the following error
```
␍ Operation fault at: 00000000␊
␍ Fault record is on stack at …