-
**Describe the bug**
The wifi device doesn't appear with `ip a` command.
Failed to run INIT ucode: -110
`dmesg |grep iwlwifi` gives:
```
[ 4.150315] iwlwifi 0000:00:0b.0: can't derive rout…
-
你好,我正在调试以太网驱动,公司使用的是IP101GRI这个phy芯片,5.10内核下有这个驱动,也已经打开并加载了,并没有报错但是网卡没有正确加载,手动添加ip后,eth0是有了,但是读不到phy的id,也ping不通网关。
但是在linux 4.4是正常的,需要解决Y2038问题所以得升级5.10版本。
因为我刚入门Linux所以技术不是很强,也调了很久了,在谷歌上实在是找不到解决方法…
-
After a recent update, I can no longer launch any XWayland program. The `DISPLAY` environment variable is not set.
Here are the log lines from Hyprland containing `xwayland`:
```
$ cat /tmp/hypr/0b…
-
While looking through the netgear sources for the VEVG2500, I came across a few packages related to lantiq firmware. Sadly, there were no binaries, though I thought this information might still be use…
-
I'm trying to open a Lx01-container which we got delivered by a company. The container seems okay because Encase and Xways can open and extract all files within but libewf fails even when trying to ac…
-
Dear all,
I happen to observe a very odd behaviour of the WSPR transmitter which for I have no explanation.
### Description of the setup:
* Device: STEMlab 125-14; dmesg below
* SD card im…
-
*MPW:*
The 7362sl by AVM has two gigabit ports labeled 1+2 and two fast ethernet ports labled 3+4.
They all used to work, but with OpenWrt 21.02.0 only the two gigabit ports work. Port 3+4 are dea…
-
```
rauc install http://10.0.0.10/bundles/update.raucb
installing
0% Installing
0% Determining slot states
20% Determining slot states done.
20% Checking bundle
20% Verifying signature
…
-
- Will Windows(amd-64) version be released?
- Is shadow-tls compatible with trojan/v2ray or such protocols?
- If the answer of former issue is 'Yes' , can you give the configuration files out?
…
ghost updated
2 years ago
-
I've witnessed an issue on two HH5a with v22.03.0-rc1 where the hubs 'may' some times take a considerable time to boot up. (**Update Jan 2023:** Issue still exists in latest 22.03.3)
Normally for…