-
How can I add zigbee sub-devices in the local tuya?
-
### The problem
ZHA stuck in Initiating. I've had the problem since 2024.8 was released. Tried now last 2024.8.3 with the same problem. Restore to my beckup with 2024.7.4 and ZHA works again.
### Wh…
-
If I try to add energy usage from SP2600ZB to homeassistant energy dashboard it does not work. From https://www.home-assistant.io/docs/energy/faq/#troubleshooting-missing-entities I see that the senso…
-
### The problem
After installing the 2024.8.1 update, all my Aqara devices became unavailable and reported ' Identify became unavailable' & 'Identify became unknown' in the Logbook. I was able to add…
-
Hi,
I reckon this might not be the question but hopefully you can shed some light on this for me. Thank you and advance.
So I have several LYWSD03MMC devices. Some were flashed with your firmwar…
-
### The problem
Switch turns off randomly
Also Current and Energy deliverd is not correct in ZHA
In zigbee2mqtt it's working fine.
### What version of Home Assistant Core has the issue?
core-202…
-
Currently there is a special logic at https://github.com/zigpy/zha/blob/9fe83455574b8aa3f29cb5e722f3b312e6615f79/zha/application/discovery.py#L449 that converts a OnOff output (client) cluster into a …
-
Hello,
I flashed my LYWSD03MMC hw2.0 using an UART. After that, I reset the device and I could configure it using the ZHA integration. ZHA read received data first time, but after that there have b…
-
You removed the repo for this from hacs because most of the features were added into HA, except I cannot add a zha card to Lovelace with the built in integration. I have a monitoring dashboard that in…
-
Bonjour Claude, premièrement, merci pour tes efforts d'intégration Sinope.
J'ai un soucis avec l'ajout du DM2500ZB qui s'affiche dans HA mais qui ne peut être controlé. Initialement, j'ai ajouté l…