-
Does anyone meet the stability problem in Zigbee2MQTT? I flash the firmware to CC2530(E18-MS1-PA1), and it seems that very unstable.
(1) I use coordinator cc2652p, and very close to the 20 keys fr…
-
Не могу зарегистрировать перепрошитый LYWSD03MMC в сети Zigbee2MQTT. Ситуация такая. Была прошивка от devbis.
Удалил датчик из сети (принудительно). Прошил Z03MMC_v0119.bin (по проводам). Запускаю в …
-
### The problem
Hi,
I recently added a Sonoff Zigbee stick to my Home Assistant (HA) installation and configured it to work with Zigbee2MQTT instead of ZHA. However, I've encountered an issue wher…
-
my new 2 channel water timer is not recognized by the iobroker Zigbee adapter
![insoma Watertimer TS0601](https://github.com/user-attachments/assets/426611b4-d6bb-4282-be47-6180e3037bc8)
https://d…
-
### What happened?
**Hello my english is not the best. SRY
I suddenly after update had an issue.
My Sonoff Zigbee 3.0 does´t start with Zigbee2MQTT.
I had this issue "z2m: Error while starting z…
-
Good morning
I am trying to update the FW of my roller shutter switch 067726A unfortunately it is impossible on Home Assistant
I don't know how to force the update
Here is the error I have on…
-
I migrated over to the 26252P2 from a usb stick that ended up dying. I deleted the zigbee2mqtt addon in my HA instance since it wasn't working off the bat. I have regular zigbee working - but can't ge…
-
Hello,
I have installed and used node-red-contrib-i2c version 0.9.0 on Raspberry Pi4 for a long time and with different i2c devices without any problems.
Now I installed the zigbee2mqtt package and …
-
A button device that has been successfully flashed with this firmware has a problem during use. In the same zigbee2mqtt network, when the button switch is turned on and off, the A switch([QBKG41LM](ht…
-
### What happened?
Hello,
Basically, about every 2 minutes, z2m restart.
I tried to look on logs, on debug, warning, ... to find the reason without success.
So far, I have integrated only 1 eq…