-
```
[CONTROL]
# --- global defines for control behaviour ---
# POWERMETER_TARGET_POINT is the target power for powermeter in watts
POWERMETER_TARGET_POINT = 0
# POWERMETER_TOLERANCE is the tolera…
-
**Describe the feature**
Feature request to support the backup reserve setting of the SE Battery in conjunction with the SE Backup Interface.
The modbus register address is 9735…
-
Commit: ```4f3df1ba059c6cb30518a8d7da50832bc82f2925``` Branches: mainDuration to run seed in ReleaseSafe mode: 3m50sDebug Logs:Tail
```debug: Replaying seed 16825366195277209080 in Debug mode with ful…
-
The Fireface 802 has a three-state LED per Mic input indicating the status of the input. It can be in the states `off`, `48V` or `Inst`. These states are taken from the manual: https://archiv.rme-audi…
-
Hey Fellas- I got my board together and tried a test for the first time last night. I'm not getting any indication of power on the board.
I made the two cuts, installed a IPD068P, changed the zener …
-
Hello Telekatz,
thx for this module!
Actually i am testing with this and wondering how to configure the Startup limit min and max. and the feed-in limit mode.
My system looks like yours, but c…
-
Hi Daniel,
I have flashed your firmware, and overall everything is working fine!
One thing that's not working though, is my speed sensor. I have a BBS02B with a 48V battery and the 500C display…
-
When using `furiosa_device::blocking::list_devices`, sensor_container of Device.Fetcher is empty. Printing the fetcher from the non-blocking function (`furiosa_device::list_devices`) shows:
```
Fetc…
-
Good day,
I built a 48v AWD Delta. I'm running an SKR pico for my main board ( heaters, therms, and fans) and 2 Supernova boards from Annex engineering at 48v for all steppers with Bigtree 5160 p…
-
The battery had 3 bars when I started the ride and the immediatelly it dropped to 2 bars (around 40%) on the screen, what is a perfectly normal behaviour in my humble opinion.
I rode 3 km-s in the c…