-
F libc : Fatal signal 8 (SIGFPE), code -6, fault addr 0x18b in tid 3434 (CAM_JpegProc), pid 395 (cameraserver)
-
The discussion to rename the "camera streaming daemon", has been happening in pockets.
One of the suggestions, was to rename it as : "Dronecode Camera Server".
Feel free to share your opinion he…
-
This way it will accept images both from ICE image drivers (like cameraserver) and from ROS image drivers (like usbcam and bag files with images).
At the same time it should accept the 'standard' YML…
-
Make sure you are running the latest version of Anbox before reporting an issue.
Please also check that no similar bug is already reported. Have a look on the list of open bugs at https://github.co…
-
-------- beginning of main
01-09 04:29:25.075 445 445 W auditd : type=2000 audit(0.0:1): initialized
01-09 04:29:28.599 445 445 I auditd : type=1403 audit(0.0:2): policy loaded auid=429496…
-
Current release works only with ICE image servers (like cameraserver). In order to use also ROS nodes that serve images, slam-visual_markers should be refactored to use Comm library for communications…
-
At some point Anbox doens't start anymore on Ubuntu 16.04. Inside the logcat I found the message `Opening '/dev/binder' failed: Permission denied`.
**`anbox system-info` below:**
```
version: 3
…
-
There are plenty of violations. We run in ``permissive`` mode, so it works, but I am not sure what will happen in ``enforcing`` (passed by uboot to kernel as cmdline parameter)
-
Running README instructions for Intel Aero variant failed (on Ubuntu 16.04)
1. Instructions were:
```
sudo apt-get install gstreamer-1.0
sudo apt-get install libgstreamer-plugins-base1.0-dev
su…
-
This link in the readme: https://raw.githubusercontent.com/robotpy/robotpy-wpilib/master/installer/installer.py