-
Hello,
I have a SG4K, where can I find the modbus specification? Thanks.
-
Here is the official docs for the hybrid range:
[communication-protocol-of-residential-hybrid-inverterv1.0.20-1.pdf](https://github.com/bohdan-s/SunGather/files/7724948/communication-protocol-of-re…
-
Hi and thanks for your impressive work!
I'm about to receive a SG15RT string inverter myself in a few weeks. Can you confirm your script works with it? I know you listed it as supported, but I read…
-
I think it is connecting correctly to the inverter. Here is my config.py:
inverter_ip = "192.168.4.45"
inverter_port = 8082
slave = 0x01
model = "sungrow-sg8kd"
timeout = 10
scan_interval = 30…
-
/cc @premultiply @DerAndereAndi
andig updated
2 years ago
-
Hi everyone,
thank you very much for this great tool.
As you know I am using it for SH-Inverters and it works great.
But know I need to work with an SG-Inverter (SG10RT). The WiNetS WebInterfaces…
-
Hi thomasfa18,
I'm wanting to write my own application in C#. I note that you mentioned that you had the official modbus map and was wanting to know if I could get a copy? In particular, I'm afte…
-
Hello! I use the solariot with Sungrow SH6-0RT inverter and mqtt. Inverter and raspberry are in the same LAN, mqtt server ist remote.
Works fine for some time, I can get messages from mqtt. Then th…
-
Hi!
I'm new to home assistant but this appears to only support one inverter, is that right ? Thanks to others I found the correct MQQT config and details for home assistant configuration.yaml and …
-
model = "sungrow-sg5kd"
timeout = 60
scan_interval = 60
I've tried multiple time outs (60 is the most I've tried)
It is strange because if I restart the script it works every time