-
As reported in https://github.com/newsboat/newsboat/issues/254#issuecomment-415651046, Infer static analyzer found a ton of issues with accesses to `uri.user` in `controller`:
1. src/controller.cpp…
-
I'm struggling with service resolution for my Actors. I have a command handler pattern that resolves ICommandHandler generic handlers, and I have a repository service that the command handlers use. …
Flern updated
5 years ago
-
Hi,
Just wondering if we can look at improving the load time of colourisations on pin2dmd hardware, my understanding is there is a introduced delay to allow pallet files to be loaded onto the hardw…
Wob76 updated
5 years ago
-
https://gist.github.com/scheibo/534d9bb858a0824082a3b9dce1fee61c (discovered while I was implementing the `RandomPlayerAI` for my harness) and https://replay.pokemonshowdown.com/gen7uu-894258335 are t…
-
Hi,
First off, thanks for your work.
I am using your node for the wifi socket, it works great, but I am getting constant "retrytimer started" in my logs and this seems to have a negative effect…
Wob76 updated
6 years ago
-
At this point I do think it should live in a different organization, if for no other reason than permissioning.
I'm leaning mildly towards the @wobscale org, but I could easily be persuaded that it…
euank updated
5 years ago
-
VNI colouring support not working in 1.7.2 on a monitor. Was working fine in 1.7.1 and stopped working in 1.7.2?
-
on multiple pages (eg [events](https://wob.coppermind.net/events/?page=5&) & [recent](https://wob.coppermind.net/recent/?page=91&mode=created)) the forward `>` button takes you a page forward but the …
fbstj updated
6 years ago
-
Hi,
Thanks heaps for the information thus far.
I have a ducted system, model name is PEA-RP140GAA. I have 4 Zones, but the unit is capable of up to 8.
I have just started out by using the dev…
Wob76 updated
5 years ago
-
git-archive-all seems not respecting .gittatributes with export-ignore. Disabling submodules uses plain git archive and all works correct. I don't need submodules, but submodules = true is default.
…