-
I have a Wemos D1 mini running with tasmota. (version 6.6.0)
At this time, I have an aperture sensor (CP321), temperature and humidity sensor (BME280), light sensor (BH1750), presence sensor (PIR HC-…
-
Hi, I'm trying to build a weather sensor using bmp280, bh1750 + Node MCU.
I'm using Tasmota 6.5 and setting the module type to 18 generic.
I have the BMP280 connected to 3v3, GND, D1 & D2. The …
-
I'm trying to use the I2C bus on the ESP32 with a single sensor and/or multiple sensors/devices.
Here is my setup:
- platform: ESP32 / board: esp32doit-devkit-v1 / arduino_version: latest
- i2c: …
-
Looks like Show JSON button under tools menu in UI is not responding.
Thanks
-
ESPHOME finds it on BME280 (0x76) but cannot communicate with it. How can I fix it?
This happens to me on both the ES8266 and ESP32.
The error message is: Communication with BME280 failed!
-
After i upgraded to 1.7 my bme280 starts to report incorrect value, ad ex:
[sensor.bme280:193]: Got temperature=0.7°C pressure=258601.6hPa humidity=14.3%
reverting to 1.6.2 resolve the issue:
[…
-
Since Tasmota 7.1.0 (and also in 7.1.1) I have the following issue:
A WS2812 LED Stripe is connected and working fine. If I set webcommand "scheme 12" the scheme is working.
But I can't turn off the…
-
Did I miss something or are no light sensors supported yet?
This would be a nice feature when using automatic lights.
-
Could you continue the list of sensors in your project?
Or may be you can give an idea how to do it by myself)
There are sensors which I need to detect::
HTU21
BH1750
TCS34725
GYUS42
DHT12
MLX…
-
Hi!
I bought 2 CHIRP moisture sensor from the wiki link. I'm trying to make it work on a sonoff basic. I disabled the seriallog (seriallog 0). I connected vcc to vcc, gnd to gnd, sda to gpio1, scl t…