-
Hi.
Thanks for your work on the chrome gcode sender, I love the interface and it seems to be one of the most responsive gcode programs that I have used.
I did however run into a problem and thought …
-
To reproduce, open a serial connection to TinyG and send `;%g28.2 x0 y0 z0`
Expected behavior: nothing happens, it's a comment!
Observed behavior: homing sequence happens:
```
;%g28.2 x0 y0 z0
{"sr…
-
The resulting book is always empty.
I'm using
- last version of Dokuwiki "Weatherwax"
- "docuwiki" template
- last bookcreator plugin https://github.com/Klap-in/dokuwiki-plugin-bookcreator"
-
I've got grbl loaded on my Teensy3.1. It's accepting USB serial commands as expected. The onboard led is turning on for negative Y moves. So far so good. So I put an external led on the Y step pin…
-
Issue a $18=0 in edge ($12=0 in master)
this is the output:
$18=0
$$
$0=250. (x, step/mm)
$1=250. (y, step/mm)
$2=250. (z, step/mm)
$3=500. (x v_max, mm/min)
$4=500. (y v_max, mm/min)
The string is…
-
First of all thank for this great project.
I never thought it could be so easy and cheap to build a control for a DIY CNC.
I use it now for several weeks together with sketchup and SketchUcam plugin t…
-
Hey,
I have a problem to separate the payload an the header with curl, when "streaming" with the `interval=0` attribute is active.
``` bash
curl "agent.mtconnect.org/sample?interval=0"
```
exampl…
-
I wanted to start a thread to discuss how homing cycles should work and be invoked. This is actually a complicated topic as there is no guidance in the Gcode spec and everybody does it differently. Pa…
-
I've been holding out on this topic for one of the last big pushes for v0.8 edge (status reports and homing/jogging still need to be worked out, but are going to be treated separately.) This topic is …
-
strtod() will parse "E" as scientific notation, but "E" is a word in G-Code (and G-Code does not use scientific notation at all).
strtod() will parse "0X" as a base-16 number, possibly spelling disast…