-
你好，请问是否可以共享一下以上2个权重，以方便对该文章的引用与对比，谢谢。
-
FileNotFoundError: [Errno 2] No such file or directory: '/data1/lcm/ultra_resnet/tmp/txt/out0_normal.txt'
-
Hi there, I am currently willing to compile the C++ evaluation tools for culane following the instructions in INSTALL.md. There is a subtle difference of vs version between mine(vs2019 community) and …
-
The resolution is 1920x1080, slightly larget than Tusimple data, I am using tusimple configuation (raw_anchor, gird_num and cls_per_lane), the result seems totally wrong.
Doesn't it only depends on…
-
First of all amazing job with the paper!
In your paper it is mentioned that the loss coefficients for all parameters are set to 1 but in this repo for Culane both sim and shp loss are zero and for …
-
您好，看了下 https://github.com/cfzd/Ultra-Fast-Lane-Detection/commit/7666b176ac61427d9c3c6570b0f7dffd945f168a 这个submit有bug， culane数据集里部分图片虽然有三条车道线mask，灰度值范围却不是1，2，3，而是2，3，4，所以下面的code当
self.num_lanes=3时，…
-
感谢大佬的工作，请问下是否可以把tusimple数据集转换成culane数据集的格式，然后把融合后的两个数据集放在一起用culane的配置进行训练，以此来解决单独训练culane数据集无法识别斑马线和曲线车道不稳的问题？期待大佬的回复，谢谢
-
I found that achor really important to get a reasonable result.
So there is the question, how to generate good anchor ? I found that even changed a little bit stride the result would effect much su…
-
when I test the culane datasets, the errors occurs as below:
python test.py configs/culane.py --test_model ./checkpoint/culane_18.pth --test_work_dir ./tmp …