-
Hello, i recently tried to get my zeepro zim working with OctoPi and everything went smooth right up untill i tried to connect to the printer. i had selected Auto serial port, 25000 baud rate and Defa…
-
Any prints I upload to octoprint end up printing to the left of where I see them in the Gcode Visualizer.
I plated the 20mm calibration cube in slic3r and exported gcode, as well as using GPX locally …
-
Hello,
I'm thinking to buy a Raspberry PI 3 to manage and see the extruder dring the print of my Flashforge Creator Pro.
Before buying it, I want to try it on a HP tablet ElitePad with Win10 32B.
A…
-
on Dual extruder printer: FlashForge Creator Pro
First Layer Expansion is always extruder 1
http://wiki.mattercontrol.com/SETTINGS/General/Raft-Priming/First_Layer_Expansion/Loops
I expected it t…
-
I wanted to thank you for creating this plugin to make life using OctoPrint that much easier.
I noticed that you have the FlashForge Creator Pro model already added to GPX as a supported machine type…
-
Hello,
I'm thinking to by a Raspberry to manage and see the extruder dring the print of my Flashforge Creator Pro.
Before buying it, I want to try it on a HP tablet ElitePad with Win10.
All seems t…
-
Hi, I'm cross posting from octoprint repo https://github.com/foosel/OctoPrint/issues/1485
#### What were you doing?
Printing with my left print head, the right print head unheated. (though it happens…
-
Cura on the PC doesn't support makerbot et al, so how do I create a cura profile for my flashforge creator?
-
Sometimes I use the SD card and LCD control panel to print objects instead of starting the print through Octoprint. Will this plugin work in that situation? Or does it only work if I start the print…
-
I've been running a Flashforge Creator Pro with this and I'm having trouble with the second extruder offset. I set the printer properties for the Flashforge dimensions including a 34mm offset for the …