-
Hi Sönke,
4 ist "Puffertemperatur oben TPO"
5 ist "Puffertemp Unten TPU"
7 ist Vorlauftemp. Kreis 2
8 ist Rücklauftemp. Kreis 2
24 & 25 (Werte sind identisch und laufen identisch) sollten "Soll V…
-
我使用x96 air的dtb-100可以跑起来，但是一直报rtl871x错误。
使用x96 max+刷入emmc无法启动。
![微信图片_20…
-
内核虽然是标明了S905D专用，但是我在HK1-Box上尝试安装了一下，S905X3内核的安装了这个目前是稳定正常运行。不知道是否是这两种设备兼容，还是后面会有不可预知的风险？？
-
Hello Ryan,
For some reason the solution cannot be installed on MIM 2016 SP2 (version 4.6.421.0) that is running on SP 2013 (CU April 2021, version 15.0.5337.1000) as the below error appears in the…
-
希望大神有时间辛苦一下。谢谢！
-
Hi, I've recently got a s905x3 Android TV box for use with EmuELEC, easy to use and install on the MicroSD card, everything works great except for a few things:
1. No internet at all - On the TV bo…
ghost updated
3 years ago
-
I'm investigating an issue (goodmami/wn#88) where the Wn library is very slow to enumerate the hypernym paths of an OdeNet synset. Here's an example:
```pycon
>>> import wn
>>> de = wn.Wordnet(le…
-
## The problem
After restart of Home Assistant some values of Modbus registers show wrong values. Only solution is to restart Home Assistant again then it is working fine most of the time
## E…
-
## Required Information
Entering this information will route you directly to the right team and expedite traction.
**Question, Bug, or Feature?**
*Type*: Bug
**Enter Task Name**: FtpUpload…
-
Hello,
I followed the instructions for git-clone and then jumped to DKMS instructions. As soon as I enter make clean i receive the following:
```
make -C /lib/modules/5.9.16-1-MANJARO/build M=/ho…