-
Someone opened a case in openwrt for this issue but i think its firmware related problem and better here.
```
[ 10.127699] mt7986-wmac 18000000.wmac: HW/SW Version: 0x8a108a10, Build Time: 20220…
-
**Describe the bug**
The wifi device doesn't appear with `ip a` command.
Failed to run INIT ucode: -110
`dmesg |grep iwlwifi` gives:
```
[ 4.150315] iwlwifi 0000:00:0b.0: can't derive rout…
-
**Describe the bug**
My Zynthian HW (custom because not based on a offial kit) **sometimes stops booting** and to go ahead you have to reflash Os on SD.
**To Reproduce**
When it happens there are…
-
Hello! I am trying to use slint with a esp-idf cpp project for esp32-s3 (custom board). Unfortunately, I am running on some problems:
First, I installed esp-idf, esp-rust tools, etc. I created a proj…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
### Target name(s)
ESP32_BLE_REV0
### Firmware version
1.12.0.53
### Was working before? On which version?
1.8.0-preview.210
### Device capabilities
System Information
HAL build info: nanoCLR …
-
ULP example code does not build for ESP32-S3 under PlatformIO
see: https://community.platformio.org/t/asking-again-getting-ulp-tool-example-espidf-ulp-pulse-to-work/34639
-
My Rock 4C+ doesn't boot with every image I tried.
I use the alimentation shipped with the SBC, I tried with several SD cards, I also tried to flash with BalenaEtcher on Linux and with Rufus on Win…
-
something has broken in the last month or so. this always worked for me. now it doesnt.
First install ESP-IDF, install for target esp32c3 and activate py environment:
```
mkdir ~/esp
cd ~/esp
g…