-
Since doing the slave FPGA loading rework and upgrading to the latest master, I've started seeing PRBS errors roughly 100% of the time on boot. I never saw that before. Not sure if it's due to the rew…
-
@gkasprow @marmeladapk What's the status of running ARTIQ on Sayma at WUT? Can you get SAWG RF output? Can you run kernels interactively with Ethernet?
-
@gkasprow something concerning happened during my gain measurements
- I plugged my VNA into one channel of booster and measured the gain. It was a bit lower than I expected
- After a minute or so,…
-
Tracking of Issue https://github.com/m-labs/artiq/issues/872 moved here from ARTIQ.
-
@wizath @gkasprow have you tried Ethernet on Port 0 of uTCA backplane? This is a parallel route to using SATA-SFP adapter and doesn't involve a dongle.
-
@sbourdeauducq Using external 1.2 GHz clock, 180-deg splitter to drive DAC_CLK P and N. Loading the following as startup kernel. Scope shows ~50 mVpp square waves at 150 MHz.
```
from artiq.exper…
-
From https://github.com/m-labs/sinara/issues/517. There's no power applied to RTM (all LEDs are dark). Power was working fine prior to updating MMC firmware. I built my own firmware from master.
-
* Putting the PDFs, gerbers, drill, XY, BOM, renderings, panel PDFs, and .cce files into the repository won't scale and will break down (we pointed this out multiple times before)
* Retrieving actual…
-
* [x] kernel functions to read/write samples using RTIO SPI, Zotino
* [x] kernel functions to read/write samples using RTIO SPI, Novogorny
* [x] kernel functions to read/write samples using RTIO SPI…
-
@gkasprow Booster received and looking beautiful.
One observation before powering it one: it's *heavy*. I wonder if we could slightly reduce the weight without compromising performance. That might …