-
Coming error : phy_init: failed to load RF calibration data...
LOG:
[0;32mI (273) esp_image: segment 1: paddr=0x00060fb8 vaddr=0x3ffb0000 size=0x05050 ( 20560) load[0m
[0;32mI (282) esp_image:…
-
If we isolate pset templates with PSET_TYPEDRIVENOVERRIDE, there are a number of applicable entities with no type. Therefore, either the applicable entities is wrong, or the template type is wrong.
…
Moult updated
2 years ago
-
I hope you can tell me, what I have to do.
It don't recognize the digitals. I running with the actually version 8.0.3
![image](https://user-images.githubusercontent.com/25064101/127044561-a7b085…
-
Vielen Dank für das super Projekt! Hier ist es seit heute in Betrieb und an Home Assistant angebunden. Toll waere, wenn ich die Erreichbarkeit des Geraetes sauber monitoren koennte. Mir ist jedoch nic…
syssi updated
3 years ago
-
![aote_bug](https://user-images.githubusercontent.com/6583434/130347538-23f210e8-7ae9-4d85-820a-91d55464102a.png)
The actual value of digits is 01358, detector fails to see last two digits (due to …
-
Hi,
After installing both the firmware and the sd-card (I tested several types and sizes of cd-card) the boot constantly crashes.
Thanks,
Here is the boot log:
rst:0xc (SW_CPU_RESET),boot:0x…
-
Hi, we are students working on the gap8 board for some project. We are currently looking for some informations about how to use the HWCE core, but when we want to launch the WaterMeter example which i…
-
Initially spotted by @jmirtsch [here](https://forums.buildingsmart.org/t/common-property-set-applicable-entities/1013), basically there is a conflict between what the docs say, what the pset template …
Moult updated
2 years ago
-
**Bootstraptable version(s) affected**:
1.18.3
**Description**
![image](https://user-images.githubusercontent.com/5134140/115375355-49fdc680-a200-11eb-8e7e-8b328d463706.png)
**Example**
htt…
-
Hi,
we're still facing the problem, that our ESP32-Cam is not able to read the Wifi data from Wlan.ini.
The serial monitor prints an error-code "File is locked" which we found in the directory jom…