-
Hi. I cannot flash the klipper.bin file using the flash_can.py script. It seems that the script cannot recognize the UUID of my EBB42 V1.2 BTT and omits the most significant digit - which is the numbe…
-
I can't get my SB2209 working over CAN, need help:
I have an Octopus MCU with Klipper, which is connected via USB to CAN Bridge with my PI.
"~/klippy-env/bin/python ~/klipper/scripts/canbus_query…
-
I've just tested the Kraken DIN mounts and they seem to be roughly 2mm too wide between the mounting holes (top to bottom)
-
Dear all, Finally, after some mistakes, and trials, this is my contribution to schemes and connections, connector marked as 3, is NOT an Input, connector number 3 is an OUTPUT, you could use this sign…
-
Thanks @looxonline for your awesome work.
I just noticed in TFTFirmware-2020-12-06.zip (all branches) the Firmware File for the Touchscreen is called BIGTREE_TFT35_V3.0_E3.26.x.bin not BIGTREE_TFT3…
-
I couldn't find in the pins diagram the identifiersfor the PT100/PT1000. I try to setup klipper to work with PT100 but I don't know whisch pin numbers I have to declare. They are missing from schemati…
-
mv ./input_libcamera.so ./mjpg-streamer/input_libcamera.so
DOES NOT WORK for some reason
32bit or 64bit version of RPi
Please advise?
-
The configuration steps are outdated and misleading. Marlin 2.0.x implements the FYSETC variants natively.
There is no need to edit the `pins_RAMPS.h`.
In `configuration.h` search for **FYSETC_M…
-
Why don't you get support? I already have the second display of the company btt which cannot be started. Then I have another tft35 which does not boot because of a bootloader bug. And one of my skr 1.…
-
hey, I was trying to get UART working for my 2209 drivers (BTT 2209 1.2) and im getting TMC Connection Error on the screen.
what is your wiring setup for UART?
I was following this guide on yout…