-
I'm trying to develop an ethernet board with Arduino Pro Mini 3.3V, but its clock is 8MHz, does the library should work?
mrv96 updated
6 years ago
-
hello i have a problem with esp32dmxrdm when i go in station mode
the esp32 ce connect to the network then shows me this error:
config read OK.
wifi connecting to RIRI-DMX-WiFi... wifi started 2.…
-
I have several DMX/MIDI applications running on baremetal.
DMX works at 250 kbit/s. For supporting this baudrate I set the UART clock to 4Mhz using the mailbox interface. Then set the IBRD=1/FBRD=…
-
Hi Jean,
title says all, is it possible to implement a command line switch for loading an initial state file and to trigger "send all" once?
Thanks!
-
Hi there,
I have some issue with the toolbox installation. When running the RUNME script, it seems that it can not find the oapi64.dll. The problem is that I don't have such file in my Optotrak API…
-
PyUSB is fully installed, with libusb-win32. Other lighting software, such as Freestyler DMX is able to identify and use the uDMX device. The uDMX device is on bus 000, address 002. The full error log…
-
Is there an ability to send and receive hex data using this instead of strings? I am trying to interface with the following device.
https://www.enttec.com/us/products/controls/dmx-usb/dmx-usb-pro/
…
-
This is to document a few issues with VSA import that need correcting:
1) Import doesn't work if there are inactive tracks in the VSA file before the last active track.
2) Playback doesn't look sm…
-
... I am looking for an alternative to DmxSimple. thanks
-