-
You start the engine as routine, then the engine 4 gives reading of GENERATOR OFF in the eletrical page and in the overhead
# Please provide documentation references:
[
![747-400F - 2024-06-1…
-
Hello, I'm Daniel and I work with walletscrutiny.com.
Following instructions on the Keystone3 Pro project, found [here](https://github.com/KeystoneHQ/keystone3-firmware/blob/master/docs/verify.md)…
xrviv updated
5 months ago
-
This is a follow on from issue #373 .
Bug : Gpio pins for Ethernet are having their speed set to 0x00 ( low speed) instead of high speed, causing the phy interface to fail for high speed operations.
…
-
Hello. I'm using a Galaxy Note 3 (BCM4339) and I installed the Nexmon firmware via Hijacker (https://github.com/chrisk44/Hijacker), onto Lineage OS (currently using 18.1/Android 11, and this issue als…
ghost updated
9 months ago
-
**Describe the bug**
For the following devices STM32H723/725/730/733/735 the definition of `DBGMCU_APB1HFZ1_DBG_TIM24_Pos` is incorrect:
`#define DBGMCU_APB1HFZ1_DBG_TIM24_Pos (24U)`
It should …
-
Hi:
I'm trying to use the RDKit Fork to produce detailed labeling for 2D images of chemical molecules drawn by RDKit so that I can train the segmentation NN, but I have some installation issues. My…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues.
### Which plugins are affected?
Auth
### Which platforms are affected?
iOS
### Description
I'm getting the fo…
-
Hello,
The following error was given for two different flash drives. Using the preset Fedora Workstation, and then a custom image using the downloaded iso. The drives were also set back to factory…
-
This situation is because the Queue is bound to the RoutingKey before using RabbitMQ because the Queue is persistent, so the previously bound RoutingKey will not be lost.When you reduce the subscripti…
-
**Describe the bug**
When running WebUSB example on a NUCLEO-H7A3ZI-Q development board, the USB device can't be recognize and fails with a USB device enumeration error.
I successfully follo…