-
REF: https://forums.adafruit.com/viewtopic.php?f=60&t=137405
D5 is a special pin on the Itsy, but even using D7 for testing indicates something is not working:
### CP 2.3.1
```python
Adafruit C…
-
When the board type is set to Adafruit Metro M4 (SAMD51), including causes the following compiler error to occur:
.../Library/Arduino15/packages/adafruit/hardware/samd/1.2.0/libraries/I2S/src/I2S.…
blanu updated
6 years ago
-
I do not see the "[Adafruit ItsyBitsy 32u4 - 5V 16MHz PRODUCT ID: 3677](https://www.adafruit.com/product/3677)" listed as a supported board. Will you please add this as one of the available boards?
…
-
Test Case:
Messure Light trough a light-to-frequency-coverter.
Test Setup:
Feather Express M0 - Circuit Python 2.2.0
TSL235R-LF
https://www.sparkfun.com/datasheets/Sensors/Imaging/TSL235R-LF…
-
I have put the CircuitPython bundle in the lib folder of my ItsyBitsy M0 Express. In the bundle theres a driver for the CCS811. I then try the following code:
```
import busio
import adafruit_CCS…
-
I am finding that when I flash CP 3.0 to my itsybitsy_m0 _express, my Ubuntu linux system is not recognizing the FS.
It works fine if I flash CP 2.x
dmesg output when FS fails with 3.0
```
…
-
Unify the CircuitPython quick starts for mirroring across all the board guides!
For CircuitPython Expectations, see issue #583
**QUICK START PAGES:**
- [x] CircuitPython Built-Ins
- [x] C…
-
```python
>>> import digitalio
>>> import board
>>> pin = digitalio.DigitalInOut(board.D4)
>>> pin.pull
>>> pin.switch_to_input(digitalio.Pull.UP)
>>> pin.pull
>>> pin.pull = digitalio.Pull.UP
…
-
We need a new build of both 2.2 and later 3.0 which is for the feather M0 RFM69 board (https://learn.adafruit.com/adafruit-feather-m0-radio-with-rfm69-packet-radio?view=all#downloads). Unfortunately …
-
mu seems to be creating folders on my CIRCUITPY drive:
sounds - with eep.wav
images - with alien.png and alien_hurt.png
I also find a copy of these on my host machine in the mu_code folder.
Is…