-
M605 S0 is default.
Homed All axis.
T0 is at 0
T1 is at 400
Send following commands:
T0
G1 X10 F1000
The T0 head (left side) moves to X35 instead of X10,
Subsequently can not move the T0 head t…
-
The Dreame D9 Robot Vacuum is launched in Europe and has some interesting specs and feature.
**Device information:**
- Name(s) of the device: Dreame D9 Robot Vacuum
- Link: https://www.dre…
-
When I select PRE HEAT ABS my printer starts preheating the bed and the nozzle at the same time. The nozzle of course reaches the end rempetarute muuuch faster and it has to wait frequenty 5 to 10 min…
-
Would be great to play custom wav files using the API.
This is currently possible by using the following command
```
/opt/rockrobo/firmware/uart_test -e /mnt/data/rockrobo/sounds/error1.wav
```
…
-
My graphs are showing 100% packet loss. I stopped the smokeping service and ran smokeping --debug and saw this:
`FPingContinuous: Executing /usr/bin/fping -l -B1 -r1 -p 950 -b5000 -t1500 -p1500 -S5…
-
Spinning this out of #1210 because it's not what caused the problem with mqtt.local/energy usage messages, but does need to be fixed.
-
**Feature to add DND Times when the robot wont 'speak' **
**How to Reproduce**
This night (First night after flashing valetudo re) my roborock s50 played a melody and said something like 'Upda…
-
I have a start script that is a bit over the top, maybe.... [video](https://youtu.be/AoZJLQzpFMY)
And i have a pause i the middle of the routine where i load filament..
The slicer creates th…
-
I have a Roborock S50(2nd gen) with Valetudo RE v.0.96 installed. I installed it ages ago and the SSH password I saved in my password manager isn't working. Tried the original "cleaner" password too a…
-
FW 1886
Valetudo 0.4.0
Roborock S50
After an initial successful setup and first cleaning with all doors open the map was recorded correctly. But after the second and third zone cleanup with some …