-
Hello,
First of all, congratulations on this project.
I would like to make a port to work on the TWatch-2020, which is a watch based on the esp32 chip.
Screen: ST7789V
Axis Sensor: BMA423
RTC: PC…
-
Hello,
I have a MAIXDUINO with TFT display and I'm trying to build with gfxsupport enabled, but I have errors below.
Maybe it is something in my Arduino IDE configuration, but I am not sure about …
-
**Describe the issue**
Grafik Glitches. With the DP 2.8Zoll Iili9341 and the Touch Controller XPT2046. The Touch is Working.
I use the Benchmark example.
Bilder PRESS HERE
![IMG_3959](https:…
-
Hey,
im using Tasmota Compiler in Docker on my RPi, and when i set Wifi Name and Password, the build fails with error.
First i thought its because a Dot in my Wifi Name, but it happens also with (fo…
-
After upgrading to 1.8.10 the compiler cant't find #include anymore (File not found)
The whole controller was throttled down to maybe 5% of it's norma speed, everything was working like in super slo…
-
I'm trying to display a message on the screen but it remains white, however I can run every example sketch without problems. I even tried to simply make the screen gray in setup but it flickers a bit …
-
**Hi Bodmer.
I tried to test the ESP32_SDcard_jpeg example bit wont work for me
Example is untouched
SD CS pin is connected to GPIO 5
MISO, MOSI ans SCK Pins are shared to TFT and TOUCH pins
…
rs3hc updated
3 years ago
-
### It is more of clarification/feature-understanding rather than an issue
Hello.
First of all thank you so much for this as it is a very helpful tool to setup SPI TFTs with commonly found TFT ch…
-
I recently discovered the Lilygo T-display board (ESP32+ST7789), which I intend to use as Wifi-enabled replacement for an older 868MHz board (AVR). I tried several weather station sketches, and finall…
-
hi!
First of all, I can't thank you enough! This library is the only solution I've found to get the TFT to work on my M5StickC with the latest MicroPython code release and ESP-IDF!
My issue is I…