-
The default pinouts do not work on certain WeMOS devices, most commonly the D1 Mini
The configpin in particular does not work
If we can crowd source a list of working pinouts I'll add an alternati…
-
Have a sensor project running on 4 ESP8266 for weeks reading from DHT22. Just noticed that two of them had stopped reporting. Getting repeated read errors. Both happened to stop at 21 degrees C. I was…
-
# Version/revision of the library used
2.7.5
### Expected behavior
Shut down my Samsung AC correctly
### Actual behavior
@80MHz same code works well 100% of the time.
@160Mhz sometimes the…
-
**Have you looked for this feature in other issues and in the docs?** Yes
**Is your feature request related to a problem? Please describe.**
_A clear and concise description of what the pr…
-
Please take a few minutes to complete the requested information below. Our ability to provide assistance is greatly hampered without it. The details requested potenti…
-
Would love to see that Tasmota can drive a DC motor via de Wemos D1 Mini Lite/Pro connected with Wemos D1 Mini motor shield on top. The footprint can be kept small and less wiring needed.
I2C is now …
-
I am trying to set up the basic sd card operation, and using the begin() function to initialize the SD card, however it continuously comes up with errors. After constantly checking the wiring and such…
-
Hello,
Kind of newbie in the ESP32 platform..
I want to ask if this firmware works with the Arduino Nano CNC Shield v4 ?
Is it compatible ?
Thank you
-
Hello,
Great project. Firstly thanks for that.
My issue where I need support is that, I found a petling which has 33 mm inner diameter and around 120 mm length.
When I see the stl files of 3D …
-
heya im using known good hardware, with pullups on the SD CS line, no level shifters, PCB traces not jumpers - but getting 'flakiness' on init/mount
```
[E][sd_diskio.cpp:99] sdSelectCard(): timeo…