-
I upgraded a FLSUN delta with a RE-ARM. With the 8bit processor, I was using "Bilinear". When trying UBL with the RE-ARM, I get a strange result. (Only the positive axes "meshed". See "G29 T1" output…
-
I use Cura 4.6.1 and OctoPrint 1.4.0.
I connected camera from my local MotionEye server using Streaming URL. The camera shows in OctoPrint but is not showing in Cura.
My plugin version is 3.5.14.
I…
-
I have an Flsun Q5 that is using this board with 3 TMC2208 drivers for X,Y,Z and a cheaper driver for E1. I have bought a spare TMC2208 driver but I'm not sure how I can configure it. Here is the `rob…
-
- Description:
I have an flsun delta xl mk2 printer with marlin 1.1.8
When doing delta auto probing after the probe hit sometimes the probe does not reset to idle.
This causes chaotic behaviour in…
ghost updated
4 years ago
-
### DESCRIPTION
When I try to use **bilinear bed leveling** on my FLSUN delta printer, I get the message "(L,R,F,B) out of bounds". When I try to define the bounds in repetier, using the command G2…
-
I'd like to request to add 2019 FLSUN QQ-S to "supported printers".
Best Regards
Edit:
- https://github.com/foosel/OctoPrint/wiki/Supported-Printers
-
I have a FLSUN extended bed printer I bought a few years back similar to the one in this link (https://www.aliexpress.com/item/32847633139.html?spm=a2g0o.productlist.0.0.19ea4e9eeaSZrD&algo_pvid=3948f…
ghost updated
4 years ago
-
I have FLSUN QQ-S printer with MKS robin Mini board and 3.2 TFT screen. Previously I was using [this](https://github.com/berghauz/Marlin-bugfix-2.0.x-FLSUN-QQ-S) build, and everything worked fine.
…
-
Printer : FLSUN Prusa I3+, with a lot of customizations : SKR V1.3, TMC 2130 V3.0 SPI mode, TFT35 V3.0 and also Silicone 220V 750 W heated bed.
### Bug Description
After compilation Marlin 2.0.1…
-
I updated to the latest Octoprint RC on my raspberry pi and immediately ran a G33 P10 to auto calibrate.
It seems like octoprint keeps trying to get temperatures during the calibration, throwing a …