-
sudo ./demo -D 0
![-d0](https://user-images.githubusercontent.com/35894253/35483077-b12fb706-0478-11e8-994f-083f41b6d99e.jpg)
sudo ./demo -D 0 --led-cols=64
![-d0 --led-cols 64](https://user-images…
-
Hi All,
I purchased a Adafruit RGB Matrix HAT + RTC and mounted it on my Ras Pi 3 .I followed all the steps mentioned in the [link ](https://learn.adafruit.com/adafruit-rgb-matrix-plus-real-time-cloc…
-
Hi Zeller / Hi Everybody!
I bought an RPI, a hat and an RGB led Matrix 32X32 (HUB75) from Adafruit, following the instructions for installation and configuration that appears on the website, I mana…
-
Hello people. Where (the link from the manufacturer) can I buy a panel hub75 P10 outdoor scan rate 1/4 16x32 pixels RGB Led?
Thank you.
-
I'd just like to says thanks again for your library and the active driver board, which I bought from OSH Park.
You said you like to see what people are doing with your code etc so take a look at t…
-
Hi,
I am trying to use ledcat with a HUB75 led matrix, 64x64, 1/32 scan.
I found there was 1/32 scan panels that had ABCDE lines, but [mine](https://fr.aliexpress.com/item/Coreman-HD-full-color-p2…
-
Hi Hzeller,
Thank you so much for writing such a wonderful library.
I am facing an issue while trying to use this library for my HUB75 16x32 P10 RGB Modules.
Would highly appreciate you or anyo…
-
I have the software working with some indoor P10 panels, but the project I am working on needs the brightness of the P10 16 x 32 outdoor panels. Unfortunately I haven't had any success in getting the…
-
Greetings - I have two P-10 16x32 1/8 scan panels that I've connected one on top of the other. I'm using the pi 3 with the adafruit hat.
When running the demo (or any other example) the LED panel …
-
Hi there, is there anyone ever experienced multiple vertical pixel lit when trying to SetPixel single pixel. I'm trying to turn on single pixel but I always got 4 vertical pixel lines.
Can anyone …