-
## Bug report
**General Information**
- Cilium version: 1.17.5 and 1.8.0-rc4 d27124066
- Kernel version (run `uname -a`)
- Orchestration system version: Kubernetes v1.18.4
- Generate and uplo…
-
反馈bug/问题模板,提建议请删除
## 1.关于你要提交的问题
Q:是否搜索了issue (使用 "x" 选择)
* [ ] 没有类似的issue
## 2. 详细叙述
### (1) 具体问题
所有组件都顺利编译完成,但在安装阶段出现了问题,换用其它的编译环境也出现相同的错误
### (2) 路由器型号和固件版本
编译环境 Ubuntu 20.04 …
-
您好,实在不好意思没找到您的联系方式,只能以issue的方式跟您联系。
看了IPTV中继原理,我想问一下光猫是如何设置的。
我也是北京联通,去光猫配置看了一下,跟您截图一模一样。光猫改了桥接模式,主路由拨号。iptv盒子插光猫任意口都可以收看。可问题是我电脑直连光猫,dhcp,获取到192.168.1.x的地址,不能上网因为是桥接模式。(改了路由模式,光猫拨号问题一样)但是理论上应该有组播的信…
-
**Description**
I compiled the kernel with Rust support and tried to boot. However, I am stuck at the emergency shell.
From what I can see in logs, it seems that the modules fail to load. Might be r…
-
`User-Agent Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:76.0) Gecko/20100101 Firefox/76.0
FreeBSD 11.2-RELEASE-p20-HBSD 07ef86ce9ca(stable/20.1) amd64
OPNsense 20.1.7 bb116282f
Plugins os-acme-cl…
-
我不是很懂 IPTV 的原理啊,只是折腾的时候试出来的
在路由器里设置路由表如下,然后就可以直接用 `rtp://`开头的地址看了,不需要 udpxy
```
ip route replace 239.0.0.0/8 dev eth0
```
当然地址段其实也可以直接写 `224.0.0.0/4`.
貌似是因为桥接拨号之后默认走的是 `ppp0`,强行走光猫就可以(假装是机…
-
_NOTE: I am [reposting my forum post](https://forum.beagleboard.org/t/l2-cache-flushing-due-to-starfive-7100-architecture/29197) here for greater visibility._
The BeagleV beta boards have the StarF…
-
Hi everyone, I have been using this fantastic system for some time now and I must say that I am very satisfied.
But now I have a new need, I would like to use my public ip to hijack them directly on …
-
反馈bug/问题模板,提建议请删除
## 1.关于你要提交的问题
Q:是否搜索了issue (使用 "x" 选择)
* [x] 没有类似的issue
## 2. 详细叙述
### (1) 具体问题
A:** ARP劫持问题**
编译出的固件作为路由部署后,会劫持内网其它设备ip(包括其他网段)劫持为该路由MAC地址,造成网关非该路由的内网设备无法上网。
##…
-
with the beta.5 update if you change the state of a device for example a dimmer to let's say on then off within a second it does not react you have to wait few more second's thenn turn it off again, t…