-
I added a modal and an upload button... so far.
The upload code is available already from the smoothie project yay: https://github.com/Smoothieware/Smoothieware/blob/8cbd981e85c918e059a6e68d70fbf3cda…
ghost updated
8 years ago
-
Tried safety features and new reset functions this evening and ran in a strange thing:
- while running job, pressed abort job button
> machine stops, alarm state triggered popup shows
- press opt…
-
I found the coordinates showing X/Y/Z position are delayed (looks like machine 'Run' status is frozen for a little while) when manually jogging from 0,0,0 to X- or Y- or Z+ (jog by just one click usin…
-
#### What were you doing?
Attempting to extrude any length/volume of filament after homing.
#### What did you expect to happen?
Filament to be extruded normally. Geared extruder to move and push th…
-
### What should I include in a bug report?
Always use the following template (you can remove what's within `[...]`, that's
only provided here as some additional information for you), **even if onl…
-
Setting pin to open drain in the config is not discussed in config or manual. There is mention in switch. Also need mention on any voltage limits in using a pin as open drain. TB6600 driver such as…
-
Firmaware version:
SENDING:version
Build version: edge-d792543, Build date: Dec 15 2016 13:37:18, MCU: LPC1769, System Clock: 120MHz
5 axis
Made the modifications to the config to save after…
-
While running the latest edge build, Smoothie produces non concentric circles with the attached GCode (please see attached picture for example). The problem is 100% repeatable on edge (Seemingly star…
-
## How to file an issue
If you encounter an issue with SmoothieWare, you are welcome to
[submit an issue](https://github.com/Smoothieware/Smoothieware/issues)
Before you do that for the first time t…
-
#### What were you doing?
Manually moving an axis to get to a position where home could be initiated safely after recovering from a halt state with M999.
#### What did you expect to happen?
The ma…