-
hello,
I'm trying to configure the Dashboard with the log files in usb card, but the index page indicates "no data available in table"
When I put log files in application folder and change it in s…
-
I would like to see a transmit timeout timer added. Might be better added to the MMDVM firmware.
73, Steve N4IRS
N4IRS updated
7 years ago
-
Hi dear, I noticed that the blacklist settings doesn't work, could you confirm please?
73
-
Using an OLED Screen (Generic SSD 1306 / 128x64) seems to require a lot of permissions.
I tried adding the mmdvm user to both the "spi" and "i2c" groups, but when running the example code for the OLE…
-
Hi
I noticed that in our MMDVM repeaters after the last updates, I think in the last weeks, the message of the ADC overflow have many occurrence, I try to decrease the RXLevel but nothing change reg…
-
Hi
using the YSF mode with MMDVM, connected to a YSFReflector, after the release of my FT1xD PTT, there is a tail of some seconds with my echo voice .
Is this a bug ?
73
-
File IODue.cpp, section:
#if defined(ARDUINO_DUE_PAPA)
these lines are missing:
#define PIN_DSTAR 9
#define PIN_DMR 8
#define PIN_YSF 7
#define PIN_P25 …
-
Hello, I'm trying to use a TCXO at 11.289600 mhz.
Decode stops after about 0.7 seconds and I can't improve the situation acting on the OscOffset parameter.
I guess the problem is the integer division …
-
(Repost from MMDVMHost: I think this repo is more appropriate)
Hello, I'm trying to use a TCXO at 11.289600 mhz.
Decode stops after about 0.7 seconds and I can't improve the situation acting on the O…
-
I am seeing a issue with the field delimiters in the host file. Below is the host file with TAB delimiters
My P25Gateway.ini is set to startup 10400 for this test.
# P25Hosts.txt
#
# The format of th…
N4IRS updated
8 years ago