-
It would be highly beneficial if FMI-Library would participate in the FMI Cross Check https://github.com/modelica/fmi-cross-check. For many tools this has significantly improved the maturity of their …
-
### Description
Using output of `Modelica.Blocks.Nonlinear.Limiter` for input of `Modelica.Blocks.Logical.GreaterThreshold` influences its output at lower limit.
### Steps to reproduce
In the att…
-
The situation with [ClaRa_dev testing](https://libraries.openmodelica.org/branches/master/ClaRa_dev/ClaRa_dev.html) in OMC is starting to get reasonable, as far as simulation success ratio is concerne…
-
I did some investigation on the `unbounded` annotation in Dymola and found that it would likely be a good addition for some MSL components.
The tests were carried out using `Modelica.Mechanics.Rota…
-
### Description
The simulation of fmu generated through omedit are failed while simulating in jupyter-notebook using fmpy library and throws error that is Temperature exceeded its minimum/maximum…
-
The function Modelica.Utilities.Strings.Advanced.skipWhiteSpace appears to be under-documented. The cases I have found are:
1. What does it return when the given string contains only whitespace or is…
-
There are internal comments left over that should be either removed or improved.
https://github.com/modelica/ModelicaStandardLibrary/blob/aa92ae0c2c7289d27ca6b746ea66d20b9d41d053/Modelica/Media/Wat…
-
**Reported by frank.rettig on 17 Mar 2011 15:51 UTC**
It would be nice to have a differential in the "Modelica.Mechanics.Rotational" library.
----
Migrated-From: https://trac.modelica.org/Modeli…
-
### Description
Simulation fails in OpenModelica due to the ignore of assert message for violation in bounds. This will probably lead to inf or Nan at time 0.902.
The below listed model have this i…
-
General stuff in sections 4&5, kind-specific content to 6.7.8.9.