-
I'm ASSUMING because 6.1 is Main that this is the path of least resistance at HinTak Git.
I'm ASSUMING the latest Pi 5 + 64 OS has functional path to work because, all HinTak Issues are shut down and…
-
Only raise issues for problems with the library and/or provided examples. Post questions, comments and useful tips etc in the "Discussions" section.
To minimise effort to resolve issues the followi…
-
The Checkbox in the GUI for Display Support takes no effect in the compiled Files
At this Time it is possible to define via custom Parameters - Maybe you can fix this easy
-
Followed the instructions, and the display reads out "nan" for actual readings.
Purchased the Coral Enviro Board from Mouser.
I'm wondering, shouldn't there be an overaly in /boot/overlays for th…
-
Hi Peter, Thank you so much for your work on these libraries.
I'm looking to rotate the SSD1351 by 180 degrees (for a physically upside down display).
I noticed 1327 has the ability to be …
-
```
pi@vpn2:~ $ sudo apt update && sudo apt upgrade
Hit:1 http://deb.debian.org/debian buster InRelease
Get:2 http://deb.debian.org/debian-security buster/updates InRelease [65.4 kB]
Get:3 https:…
-
So I initialize the display like this:
```
let mut display = ssd1351::display::Display::new(
iface,
ssd1351::properties::DisplaySize::Display128x96,
ss…
-
I have an ESP32 Devkit C board and a 2.4" TFT Shield with a red board color. The shield has pins on both sides: one side has parallel data and SD pins, and the other side has CS, RST, WR, RD, F_CS, an…
-
When I flash the firmware with UBL, the printer starts beeping and shows an error about Bed Temperature.
How can I fix it? Using latest version from Releases Page with UBL
-
I'm trying to run the Raspberry Pi version 3 with the latest OS image and I get the errors: `usbnet: failed control transaction: request 0x2143 value 0xe index 0x0 length 0x0`. I'm running Docker Engi…