-
After referring to [issue 232](https://github.com/aligungr/UERANSIM/issues/232), I tried to use UE on one machine to Ping UE on another machine, but failed.(the command I used is `ping -I 10.45.0.31 1…
-
hello @aligungr
i come back again, i build another VM as UE2, and i git UERANSIM that is the master version(v3.1.9). When i access my gnb, it's error,"PLMN selection failure, no cell available".Then…
-
I notice there are three UPF containers (upf1, upf2, upfb) in the setup. From the names I would understand them as two operating UPFs and one backup UPF. After connecting it to the UERANSIM, the PDU s…
-
```
gnb | [2021-07-02 18:50:13.343] [rrc] [debug] UE[3] new signal detected
ue1 | [2021-07-02 18:50:13.344] [rrc] [debug] New signal detected for cell[1], total [1] cells i…
-
Hello,
I have followed the setup described here: https://github.com/s5uishida/open5gs_5gc_ueransim_sample_config#table-of-contents
Open5GS version: 2.2.6
UERANSIM version: 3.1.7
The UERANSIM g…
-
UE cannot connect at all. gNB can connect to open5gs core. But when UE tries to connect, it fails, no packet comes to core.
Core is open5Gs. Latest version.
UE and gNB in same VM, open5gs in another…
-
Hello,
Could you point me to cause of this error, please? The solution has working before this error occurred and i haven't change any settings.
`
05/11 14:17:27.889: [sbi] INFO: nghttp2_serve…
-
-
Open5GS v2.2.9 attach fail ,error message " "DNN not supported or not subscribed in the slice"
Could you help me or share your amf.yaml /smf.yaml/ upf.yaml for me
my packet as the below
[attach_e…
-
Hi,
I tried using your docker-compose setup within a VM;
And it just hangs on
`
scscf |DEBUG: ims_dialog [dlg_handlers.c:1923]: print_all_dlgs(): ******************** 5(48) DEBUG: ims_dialog …