-
Hello, I followed the installation instructions given for Linux. I have dropped the files on an SD card (fat 32 formatted card) but I think (?) that the redpitaya is not booting from it or not booti…
-
Dear Pavel
I'm about to make a "Red Pitaya Shield" to house a CODEC module, my Arduino and the various I/O connectors for your project sdr-transceiver-hpsdr. I want to understand the polarity of th…
-
I tried to run the adc_test project but if I start the server first, loading the image on the FPGA leads to a non-responding system. Trying the other way around with first loading the image and then s…
-
Hi Pavel and all,
I use Red Pitaya with OpenHPSDR, and it works perfectly in reception, but I can not to transmit.
I put ExtIO_RedPitaya_TRX.dll in the directory C: \ Program Files (x86) \ OpenHPSDR…
-
First, I am running FW 098-336 STEM 14 as well OpenHPSDR Charly 25 rec 2017-07-20.
The I tried to use the IO-1, IO-2 and IO-3 from the Red Pitaya E1, that supposedly should control a preamplifier and…
-
Hi Pavel! I hope you're doing well!
I'm trying to fully understand your application: ADC-Recorder-Trigger.
We have discussed (on Nils Roos' forum) about the configuration of SLCR registers (for…
-
Hello,
I'm using the adc_recorder_trigger code to record a repeating signal. An external trigger arrives every few tenths of milliseconds and the goal is to record only a certain portion of the sig…
-
This is intended as an anchor issue for making machinekit work on Zynq boards, including the mesanet firmware in the FPGA. Let's collect Zynq-related discussion here.
-
Hi,
could you give a short introduction how to use HamVNA with your SDR app?
I'm using the HPSDR transceiver App from the Bazaar and installed the HamVNA software. The connection works so far but I d…
-
Pavel,
I am having issues running PiHPSDR with the current HPSDR version. I created my own bit file - no issues with the compile, and compiled the server - again no issues. When I start up PiHPSDR …