-
I'm working on a SAMD51 project involving audio recording, so I need control over the sample rate, which the current HAL does not offer. The PWM HAL does offer control over frequency, and for the sake…
kdsch updated
3 years ago
-
There are parties that need to demonstrate that some of the randomness comes from a hardware based true random number generator (TRNG). For instance, some banking regulations and other standards requi…
-
I can pretty much assure you memory allocation in ArduinoJson is failing on Atmel (Microchip) ATSAMD51N19A chips.
I am not sure what the problem is but it "looks like" the memory allocation always …
-
PIO Core Call Error: "Error: Unknown environment names 'STM32'. Valid names are 'STM32F103VE_longer, at90usb1286_cdc, teensy31, LPC1768, DUE_USB, megaatmega2560, mks_robin, STM32F103RC_bigtree_512K, m…
-
On circuitpython.org the "UF2 bootloader" section for SAMD ports links to the self update uf2 directly, with links like *https://github.com/adafruit/uf2-samdx1/releases/download/v3.10.0/update-bootloa…
-
### Subject of the issue
To the best of my knowledge, the SAMD51 Processor board definition appears to be missing (at least) all General/Bus pin definitions in its `variant.h` file.
### Your workb…
-
Hi
At first I would to say I'm new to Arduino world, that excuse me in advance if I made a mistake somewhere. Basically I have the Arduino Leonardo board with an ethernet shield with W5500 chip. I …
-
The variant configuration for the SAMD51 MicroMod is incorrect in `boards.txt` which results in compilation errors. The config specifies `SparkFun SAMD51 MicroMod` while the variant directory is `Spar…
-
Hi,
I am using your library in my custom board which has SX1262 chip and SAMD51 MCU on it and compiled the LoRA_TX example code. But i got the error COM port isnt available.
Any clue why is lik…
-
I think it would let us figure out the number and kind of connectors to put on the badge if we had a better idea about what would people connect to them. To start the discussion, I will list some idea…