-
They have locked down the design and are in the process of qualifying suppliers so it's probably 2-3 months away. Of course the Corona virus pandemic may cause disruptions. It will use the IMXRT1062 a…
-
RX does not bind when flashing CRAZYBEEF4FS (HAMO) (unified target, not the legacy one)
**To Reproduce**
* Flash Betaflight 4.1.0 unified target for CRAZYBEEF4FS
* Apply default when connecting t…
-
The crosshair consists of the wrong icons as seen on the photo. I have tried to upload the included font again through configurator but the problems persists. Previous version was on 4.0.6 and there w…
-
STAT on my STM build doesn't consider a disk as present unless it's explicitly referenced, or has been 'visitied'. In any event, the free space for all disks seems to return the same value for all dis…
-
This is a very strange issue which I *think* I have tracked down to this crate. In my project, I have the following [code](https://github.com/TheZoq2/weather/blob/hardfault/stmhardware/src/main.rs#L39…
-
Hi,
When using a 6 positions button to select flight rates, positions 1 and 6 cannot be selected when using a Spektrum receiver while it works fine when using a Crossfire or Frsky one...
It seem…
-
**Describe the bug**
The main bat voltage OSD element shows only 0.1V accuracy although it has 3 siginficant digits when a 2S lipo is plugged in. Average cell voltage, betaflight configurator main ba…
-
Hi All,
I have pulled my STM32 board from the drawer and gave it a try on the Arduino.
It seems to work fine with code from this project: https://www.stm32duino.com/
Source code here: https://git…
-
# If your issue looks like a hardware fault or a configuration problem please don't raise an issue here.
## Please consider using other user support options such as asking the manufacturer of the h…
S-T-A updated
5 years ago
-
I have a derivative of the Blackmagic Probe that is about to be launched as a Crowd Supply campaign. I use VSCode for my STM32 development and would love to be able to use this new probe. It is fully …