-
I am not sure, if this is an issue with marlin or the TMCStepper library, but I post here first.
In marlin when I restore power to my TMC5160 (M80) the steppers dont move anymore.
In stepper_indirec…
-
A suggestions to add the $33 setting (spindle PWM frequency) from grbl-LPC snowballed into a bunch of stuff. I had been holding back on adding to the settings. Once I decided to change them, I add…
-
The TMC2160Stepper::PWMCONF() Function is trying to read from a write only register, and overwrites the correct value of `PWMCONF_register.sr` with zero
I changed it to:
```cpp
uint32_t TMC2160Ste…
-
### Description
Layers shifts with the latest bugfix-2.0.x.
### Steps to Reproduce
1. Start printing a part,
2. After several hours I can see a layer shift
**Expected behavior:** I shou…
-
### Description
I installed TMC2209 from Fysetc on my SKR 1.3 of my CoreXY and tried to get sensorless homing to work. UART connection works fine, but X and Y endstops always show as "TRIGGERED".
…
-
Let's coordinate the Marlin 2.0 RC1 release and track remaining work for this first release candidate.
### AVR
Board|MCU|SD Card|LCD|TMC SPI|TMC UART|EEPROM|WiFi|Max6675|Neopixel
-|-|-|-|-|-|-|…
-
Hi
First of all: thank you for this great work!
Is there a reason you dont use Globalscaler for setting the current on TMC5160?
Trinamic states in the Datasheet:
> Hint For best precision of cur…
-
Hello to all,
I can not compile Marlin 2 for BIGTREETECH-SKR-PRO-V1.1:
In file included from Marlin\src\module/stepper.h:221:0,
from Marlin\src\Marlin.cpp:37:
Marlin\src\module/stepper_indirect…
-
My BLTouch works perfectly and deploys and retracts on command but during g28 it will not deploy
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinF…
-
Today i finded this terrible bug, that makes my machine inoperative.
For some strange reason, if you add to the firmware the config options of a delta, and enable big things that costs a lot of memor…
neox3 updated
4 years ago