-
Figure I can leave a issue here just in case other Ender3 users are having issues.
I tried using a TF to SD card adapter. The BTT-SD-CLOUD-V1.0 does not power up from the TF slot on a Ender 3.
N…
-
### Description
Starting Cura crashes Printer
### Steps to reproduce
1. [First Step]
Connected with USB
2. [Second Step]
open Cura 4.8
3. [and so on...]
rebootloop till unconnect or clos…
-
Use the provided marlin version from BTT github repository and compiled errorfree in visual studio.
But when connecting (usb)power showing this (picture). With other wotherboard this lcd works correc…
-
the "Enable Sensor" checkbox seems to have no impact; if I uncheck it, my prints still get paused.
Additionally, if I set the plugin to "distance detection", it seems to trigger after just a few se…
-
Good day.
I can get the cb1 to boot but the firmware.bin is never picked up by the sdcard reader. I've tried DFU mode but it always errors out:
`biqu@BTT-CB1:~/klipper$ sudo dfu-util -a 0 -D ~/…
-
there are umpteen hundred forks and derivatives of this code yet the only one that truly works is the original!
I know, not an issue here, but I had to share after a day and a half of dorking aroun…
-
Hi! I recently purchased a Hermit Crab & an H2 extruder for my Ender 3 v2. I'm having a problem determining how to connect the Hermit Crab to my 4.2.7 motherboard. The provided wiring harness has seve…
-
In preparing for the publishing of the WA Translation Manual to the WA Catalog ---
Could the link on the main menu for Translation Manual be changed from 'translationAcademy' to 'Translation Manual…
-
Just hooked up to SKR E3 mini 2.0 with a TFT70 v3 (fw 3.0.26.2).
One thing i have noticed is it does not like you to change the extrusion temperature "On the fly" in Marlin UI. I tried to decrease …
-
Hi i want to use a SOQuartz unit with the BTT rpi pad 5"
https://biqu.equipment/collections/lcd/products/bigtreetech-raspberry-pad-5
https://github.com/bigtreetech/Raspberry-Pad
this "Mobo" hav…